Photopolymers for the production of stamps liquid rubber are curable in ultraviolet light. The uv light should be in the range of 315 to 380nm to produce a flexible rubber with a hardness of 55 Shore A. differently of photopolymer plates, the uncured portion is removed with detergent and water, being environmentally friendly. The photopolymer Polystamp available in red, green and crystal, can be formulated in other shades according to customer’s requirement. Regarding the containers can be packed in bottles 500g/900g/1000g/20kg or 200kg drums. The inks used are water based tolerating up to 10% alcohol. Paints oil can over time damagethe stamp. Should not be used solvent based ink (Hydrocarbons, esters, ketones, etc.)
| Odor | No |
| SKIN IRRITATION | No |
| VOLATILE | Zero % |
| ATMOSPHERIC POLLUTION | No |
| FLAMMABLE | No |
| SPECIFIC GRAVITY(g/cm3) | 1,015 ± 0,02 |
| VISCOSITY(25° C)/Pas | 26 ± 2 |
| COLOR | Incolor |
| FLASH POINT(°C) | > 90 |
| HARDNESS(SHORE A) | 55 |
| TENSILE STRENGTH (N/mm2) | 1,4 |
| ELONGATION(%) | 100 – 115 |